Short range molecular distillation, short range molecular distillation equipment

It has the functions of precise temperature control, automatic anti suction, uniform heating, anti explosion and boiling, intelligent end-point control, etc. Easy to use, energy saving and environmental protection. It is a new intelligent distillation treatment device integrating constant temperature heating, automatic control of distillation end point and cooling water circulation according to the laboratory distillation pretreatment operation procedures. After the instrument is installed, it should be debugged first, and then it can be used. The specific operation method of debugging this instrument is as follows: short-range molecular distillation

1、 Check the cooling water circulation system

Turn on the cold water circulation switch, the condensate pipe begins to feed water, and observe whether each interface is leaking. If it leaks, it is necessary to reseal the connection. After the circulating water of the condensate pipe is filled up, the normal liquid level of the water tank is between the yellow line and the red line. The normal operation of circulating water can be judged by whether the green water flow meter on the right side of the front of the instrument rotates.

2、 Specific operation mode

Add distilled water into the distillation bottle, which is sealed and connected with the anti backsuction device through hollow sealing plug and hose, the long arm mouth is sealed and connected with the condensate bottle, and the distillate of the condensate bottle is sealed and connected with the receiving bottle through hose.

Selective distillation experiment

Turn on the main switch and the auxiliary switch, enter the "preset menu" interface, press the "select" key to select "experiment selection", press the "confirm" key to enter the "experiment selection" interface, press the "select" key to select ", press the" confirm "key to select, and press the" return "key to return to the" preset menu "interface. For the distillation end point control of each experiment: weight setting and time setting, there are default values, which can be adjusted by the user according to needs.