【Category】:Rotary evaporator
【Attribute】:EXER-201d explosion-proof
【Range】:Laboratories, pharmaceutical companies, schools, for evaporation, distillation, separation of chemicals
【Description】:Explosion proof exre-201d rotary evaporator, the evaporation bottle rotates at a constant speed, and the water bath is heated at a constant temperature. Under this condition, the material forms a larg
项目描述 | 产品详情 |
产品介绍 | Explosion proof exre-201d rotary evaporator, the evaporation bottle rotates at a constant speed, and the water bath is heated at a constant temperature. Under this condition, the material forms a large area of uniform film on the inner wall of the evaporation bottle and evaporates quickly. Under vacuum conditions, the evaporation efficiency can be improved (vacuum device needs to be connected). When the solvent steam passes through the glass condensation coil, it is cooled into liquid (cooling device needs to be connected), and it is recycled in the collection bottle. |
基本配置 | 1、主体支架采用不锈钢+铝合金,结构合理,用料讲究。 |
2、密封系统采用聚四氟乙烯和进口氟橡胶组合密封,能保持高真空度。 | |
3、真空压力表显示实时真空,真空度可达0.098Mpa。 | |
4、玻璃部件全部采用高硼硅玻璃(GG-17),耐高温,防腐蚀。 | |
5、可连续进料方便客户使用,阀门式加料管套接四氟乙烯管。 | |
6、直立式双层蛇形盘管冷凝器,确保高回收率,附加料管。 | |
7、微电脑式ON-OFF电源开关控制。 | |
8、浴锅数字显示、智能恒温控制,K型传感器快速、准确传递温度。 | |
9、电子无极调速(0-120rpm),转速数字显示,旋扭设定,操作方便。 | |
10、熔断器安全保护。 | |
11、锅胆采用优质不锈钢,防腐耐用。 | |
12、浴锅手轮升降。 | |
13、收集瓶设有下放料,方便蒸发提取物的收集、放料。 | |
14、整机电器防爆处理,调速、控温一体式,铝壳防爆,防爆电机,电缆穿防爆管。 | |
注意事项 | 1、如真空抽不上来需检查 :各接头,接口是否密封 ;密封圈,密封面是否有效 ;主轴与密封圈之间真空脂是否涂好 ;真空泵及其皮管是否漏气;玻璃件是否有裂缝,碎裂,损坏的现象。 |
2、各磨口,密封面密封圈及接头安装前都需要涂一层真空脂. | |
3、加热槽通电前必须加水,不允许无水干烧. | |
4、拧入保险孔内保险,以免损坏烧瓶. | |
5、玻璃零件接装应轻拿轻放,装前应洗干净,擦干或烘干。 | |
图片详解 |
基 | 规格型号 | EXRE-201D |
电压/频率 | 220V/50HZ ( 可定制110V/60HZ ) | |
整机功率 | 1040W | |
电机功率 | EX40W | |
加热功率 | 1KW | |
真空度 | 0.098Mpa | |
旋转瓶容量 | 茄形 1Lφ131mm/24#标口 | |
收集瓶容量 | 球形 1Lφ131mm/35#球磨口 | |
旋转速度 | 0-120rpm/min | |
控温范围 | 室温-180℃ | |
控温精度 | ±1℃ | |
玻璃温度范围 | -80-250℃ | |
浴锅升降行程 | 200(mm) | |
冷凝器尺寸 | Φ85*430Hmm 下35#球磨塞 | |
冷凝面积 | 0.17㎡ | |
加料阀 | 19#标塞阀 进料咀(宝塔接头)外径10mm | |
真空抽气咀 | 宝塔接头外径10mm | |
冷凝盘管进出循环咀 | 宝塔接头外径12mm | |
放料阀 | 侧出料咀(宝塔接头)外径15mm 离底板200mm | |
浴锅尺寸容量 | Φ245*140Hmm 约6.6L 5.5KG | |
锅壳尺寸 | 310*320*240mm | |
底板尺寸 | 350*330mm | |
外形尺寸 | 790*360*1060(mm)宽深高 | |
机器净重 | 32Kg | |
包装尺寸 | 990*620*470mm 木箱0.29m³ | |
包装重量 | 49Kg |
Zlgj-12/ multi manifold gland type vacuum freeze dryer can sublimate substances directly from solid state to gaseous state at the "three-phase point", so that they are evacuated by vacuum, and the wat
Zlgj-10 ordinary vacuum freeze dryer, 7-inch true color industrial embedded touch screen +sh-hpsc-i modular controller, high control accuracy, stable and reliable performance. Suitable for loading bul
Znhw-dl intelligent digital display constant temperature (multi connection) electric heating sleeve can be heated at the same time, and can also be operated independently. It has its own flask clamp f
Pthw-dl temperature regulating (multi connected) electric heating jacket temperature control adopts computer chip as the main control unit, adopts multiple digital filter circuits, fuzzy PID control a
Znhw intelligent digital display thermostatic electric heating jacket uses alkali free glass fiber as insulating material, Cr20Ni80 alloy wire spring is installed in it, aluminum silicate cotton is us
Pthw electric heating jacket is an electric heating jacket that realizes constant temperature heating through electronic pressure regulation. It uses alkali free glass fiber as insulating material, Cr