NAV
【Category】：double-deck
【Attribute】：1L
【Range】：Laboratories, pharmaceutical companies, schools, for evaporation, distillation, separation of chemicals
【Description】：S212 type 1L double-layer glass reaction kettle is filled with reaction solvent for stirring reaction, and the interlayer is connected with cold and heat sources (freezing liquid, water, heat transfer
| 项目描述 | 产品详情 |
| 产品介绍 | S212 type 1L double-layer glass reaction kettle is filled with reaction solvent for stirring reaction, and the interlayer is connected with cold and heat sources (freezing liquid, water, heat transfer oil) for circulating heating or cooling. Under the set constant temperature condition, in the closed glass reaction kettle, the stirring reaction can be carried out under normal pressure and negative pressure according to the use requirements, and the reflux and distillation of the reaction solution can be carried out. The capacity is one liter double glass reactor. |
| 功能特点 | 1、用聚四氟材料和特种橡胶复合密封圈进行密封，能够耐各种不同溶剂并保持高真空度使用十分方便。 |
| 2、高效冷凝器，确保高的回收率。 | |
| 3、标准化的连接方式，拆卸非常方便。 | |
| 4、安装有放料开关，回收溶媒十分快捷。 | |
| 5、备有真空表，对低沸点物料可以选择最佳工作真空度。 | |
| 6、结构合理，用料讲究。整机采用优质不锈钢，铝合金以及新型合成材料，具有抗腐，防锈，耐各种溶剂的优点。 | |
| 7、玻璃部件全部采用GG17耐高温硼硅玻璃材料制成，有良好的物理，化学性能。 | |
| 8、电气元件精心挑选，主要部件全部采用进口原装件。 | |
| 9、电子无级调速，电机无火花，安全可靠，寿命长（30L以上选用原装进口变频调速器）。 | |
| 10、反应温度范围-80度到300度之间。 | |
| 图片详解 |
|
基 | 规格型号 | S212-1L |
| 玻璃材质 | GG-17 | |
| 底板主体支架 | 不锈钢 | |
| 釜体容量 | 1L 内径120mm外径150mm内长160mm | |
| 夹层容量 | 约200ml | |
| 便插式进出油循环口 | 低进高出 | |
| 釜盖φ150mm五口 | 搅拌口 φ50mm法兰口 冷凝口 24#标口 恒压漏斗口 24#标口 减压口 19#标口 测温口 19#标口 | |
| 放料口离地 | 30mm | |
| 釜体反应温度 | -80～+250℃ | |
| 测温精度 | ±1℃ | |
| 真空度 | 0.098Mpa | |
| 搅拌转速 | 0-800pm | |
| 搅拌轴径 | 8mm | |
| 搅拌电机功率 | 40W | |
| 电压/频率 | 220V/50HZ | |
| 外形尺寸 | 330×350×1220mm宽深高 | |
| 净重 | 17.5Kg | |
| 包装尺寸 | 1200×400×450mm 木箱0.22m³ | |
| 包装重量 | 32.5kg | |
功 | 调速方式 | 电子无极调速 |
| 转速显示方式 | 数字显示 | |
| 密封方式 | 四氟组件密封，φ50法兰搅拌口 | |
| 搅拌桨 | Φ10×450H（mm） 叶展80mm | |
| 冷凝器 | Φ40×350H(mm) 上24#标口 下24#标塞 | |
| 恒压漏斗 | 250ml 上24#标口配玻璃塞 下24#标塞 | |
| 减压阀 | 19#标塞阀 放气咀（宝塔接头）外径10mm | |
| 测温口 | 19#标塞玻璃测温管 | |
| 夹层进出循环口 | Φ35法兰口配套法兰盘、转接宝塔接头外径15mm | |
| 放料口 | 丝口配四氟放料阀 φ18mm放料孔 斜出料咀（宝塔接头）φ12mm 离地350mm | |
| 真空抽气头 | 24#玻璃抽气头 抽咀（宝塔接头）外径10mm | |
| 冷凝盘管进出循环咀 | 宝塔接头外径10mm | |
| 搅拌连接方式 | 万向节连接 | |
| 搅拌棒 | 描式不锈钢棒，外包四氟 | |
可 | 收集装置 | 可选回流弯头带收集瓶 |
| 防爆 | 防爆变频器、防爆电机EX60W | |
| 主体部分 | 可选框架式，喷塑或喷四氟 | |
| 保温装置 | 保温棉 | |
| 釜内温度显示 | 可选数字显示 |
Zlgj-12/ multi manifold gland type vacuum freeze dryer can sublimate substances directly from solid state to gaseous state at the "three-phase point", so that they are evacuated by vacuum, and the wat
Zlgj-10 ordinary vacuum freeze dryer, 7-inch true color industrial embedded touch screen +sh-hpsc-i modular controller, high control accuracy, stable and reliable performance. Suitable for loading bul
Znhw-dl intelligent digital display constant temperature (multi connection) electric heating sleeve can be heated at the same time, and can also be operated independently. It has its own flask clamp f
Pthw-dl temperature regulating (multi connected) electric heating jacket temperature control adopts computer chip as the main control unit, adopts multiple digital filter circuits, fuzzy PID control a
Znhw intelligent digital display thermostatic electric heating jacket uses alkali free glass fiber as insulating material, Cr20Ni80 alloy wire spring is installed in it, aluminum silicate cotton is us
Pthw electric heating jacket is an electric heating jacket that realizes constant temperature heating through electronic pressure regulation. It uses alkali free glass fiber as insulating material, Cr
Offer
4000-111-217
Technical consultation
